| WE-2100T |
| Embedded Wireless Network Enabler for Serial Devices
|
|
| Quickview |
 |
|
- Easy IEEE802.11a/b/g connectivity for one serial device
|
- Real COM, TCP server, TCP slave, UDP, and RFC 2217 operating modes
|
- Windows COM, Linux Real TTY drivers
|
|
|
|
|
| Introduction |
Overview
The WE-2100T is a secure and compact embedded wireless module for connecting serial devices to access points in infrastructure mode, or to other WE-2100T's in ad-hoc mode. When using the WE-2100T, complex RF know-how is not needed to connect serial devices to a wireless Ethernet network. Encryption for secure data transfer is supported, along with the 802.11a/b/g radio specifications.
Operation Modes for Embedded Applications
The WE-2100T supports Real COM, TCP server, TCP client, UDP, and RFC 2217 operation modes, which are designed to fulfill the requirements of embedded module applications. Complete driver support for Real COM mode is included and easy to install.
On-site Configuration with Serial Command Mode
• Easy on-site configuration of network settings
• Simple command frame format
• Comprehensive command set for serial and network configuration
• Easily switch between software and hardware triggers
• Software reset
|
|
|
|
|
| Specifications |
|
|
|
5.15 to 5.25 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps
5.725 to 5.825 GHz: 15 dBm @ 6 Mbps; 12 dBm @ 54 Mbps
2.412 to 2.483 GHz: 17 dBm @ 6 Mbps; 15 dBm @ 54 Mbps
2.412 to 2.472 GHz: 18 dBm @ 1 to 11 Mbps |
|
|
|
5.15 to 5.25 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -72 dBm
5.725 to 5.825 GHz: 6 Mbps @ -89 dBm; 54 Mbps @ -72 dBm
2.412 to 2.483 GHz: 6 Mbps @ -90 dBm; 54 Mbps @ -73 dBm
2.412 to 2.472 GHz: 11 Mbps @ -87 dBm; 1 Mbps @ -94 dBm |
|
|
|
802.11a: 54 Mbps
802.11b: 11 Mbps
802.11g: 54 Mbps |
|
|
| Data Communication Distance |
|
| Up to 100 meters in open areas |
|
|
|
| AES, WEP 64/128-bit, WPA, WPA2, 802.11i |
|
|
|
TLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPv2, TTLS/PAP, TTLS/
CHAP, TTLS/MSCHAP, TTLS/MSCHAPv2, TTLS/EAP-MSCHAPv2,
TTLS/EAP-GTC, TTLS/EAP-MD5, LEAP |
|
|
|
North America: CH1 to CH11, 5150-5825 MHz
Europe: CH1 to CH13, 5150-5875 MHz
Japan: CH1 to CH14, 5150-5350 MHz
Antenna Connector: Reverse SMA
Network Mode: Infrastructure mode (a/b/g), Ad-Hoc mode (b/g
Antenna Gain: 2 DBi |
|
|
|
|
| 10/100 Mbps, Auto MDI/MDIX |
|
|
|
| Built-in 1.5 KV magnetic isolation |
|
|
|
|
| |
|
|
The WE-2100T will detect the Ethernet linkage at boot-up. If an
Ethernet linkage is detected, the Ethernet interface will be active; if
the linkage is not detected, the WE-2100T will choose wireless as
communication interface.You can also fix the interface by configure by
with software. |
|
|
|
|
| |
|
|
| 1 data port, 1 serial console port |
|
|
|
|
|
| None, Even, Odd, Space, Mark |
|
|
|
|
|
|
|
| RTS/CTS, XON/XOFF, DTR/DSR |
|
|
|
| 50 to 921.6 Kbps (standard baudrates), 250 and 500 Kbps (nonstandard baudrates) |
|
|
|
|
| |
|
| 9 software configurable GPIOs |
|
|
|
| |
|
| ARM based 32-bit processor, 200 MHz computation frequency |
|
|
|
| |
| Management and Configuration Interface |
|
√ Windows utility
√ Web console
√ Telnet console
√ Serial console
√ Serial command mode (configure by data port) |
|
|
|
| |
|
|
√ TCP Server
√ TCP Client
√ Real COM
√ UDP
√ RFC2217 |
|
|
|
| ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, SSH, HTTPS |
|
|
| Windows Utility OS Support |
|
| Windows 98/ME/2000/XP/2003/Vista |
|
|
|
Windows 98/ME/NT/2000/XP /2003/XP x64/2003
x64/Vista COM driver, Linux Real TTY driver, SCO Unix, SCO
OpenServer 5, UnixWare 7, UnixWare 2.1.x, SVR4.2, QNX |
|
|
|
|
| |
|
|
| 0 to 55°C (32 to 131°F), 5 to 95% RH |
|
|
|
| Storage Temperature: -20 to 85°C (-4 to 185°F), 5 to 95% RH |
|
|
|
|
| |
|
|
|
|
921.6 Kbps (full speed): 720 mA
Idle: 720 mA
Ethernet mode: 480 m
Inrush current: 2100 mA |
|
|
|
|
| |
| Surface Temperature (at full speed of 921.6 Kbps) |
|
| Environment |
Top Panel |
Bottom Panel |
| 25°C |
46.7°C |
45.7°C |
| 55°C |
60°C |
68.4°C |
|
|
|
|
| |
|
|
CE EN550022 Class A
FCC Part 15, Subpart B, Class A |
|
|
|
|
|
CE ETSI EN 301 489-17
CE ETSI EN 301 489-1
FCC Part 15, Subpart B, Class A
FCC Part 17, Subpart B, Class A |
|
|
|
|
| |
|
|
|
Weight
(not including antenna) |
|
|
|
|
|
|
| |
|
|
| Standard Moxa Product Warranty |
|
|
|
|
|
|
| ↑Back to Top |
|
| Ordering Information |
|
|
| 1-port wireless module with 802.11a/b/g |
|
|
|
|
WE-2100T
• Quick Installation Guide
• Document & Software CD-ROM
• Mini DB9F-to-TB (female DB9 to terminal block)
WE-2100T-ST
• Power Adaptor
• Warranty Statement
• Quick Installation Guide
• Document and Software CD-ROM |
|
|
|
|
|
| ↑Back to Top |
|
|
|
Features